( 05-06-2015 - 09:06 PM ) - Views: 2102

The cooling system is factory steam system is simply reducing the environmental air temperature by heat exchange principle between air and the evaporation of water (not spray) creates airflow to cool space cooling is required, can be mounted directly on the blower to the cooling area or duct system design goes in studio.

Coolers mounted mobile factories blowing directly in factory

Coolers Factory factory mounted side, and go-duct system

With cooler steam factory (Air Cooler), the system includes equipment and components follows:

Coolers Factory (blow up, blow-down, horizontal flow depending on the intended use).

Air-cooled rack railway.

Air duct system at the factory.

The system for distributing wind mouth wind out 1 or more placements.

UPVC piping system for water supply and drainage cooler.

Circulating water tank for the entire system (with insulation).

Cluster water cooling equipment, ensure water temperature <22ºC- 25ºC (provided by University Vietnam)

Equipment and supplies electrical systems for cooling plants

Coolers Factory installed spread along the entire side surfaces of buildings or on the roof. Can calculate the cooling capacity of the machine for the entire factory or just for the centralized location of employees, equipment cooling needs locally in the region. Thus the system saves investment costs and power consumption while creating a cool environment to work as efficiently.

Cooling systems operation workshop, part of the water will evaporate into the air to lower the temperature, the rest flows down along the cooling plate toward the drain water in the machine to continue a new cycle . If the selected system cooling performance, the cooling temperature is less dependent on the external environment and circulating water should be very save water usage, water recirculation system makes changing system operate effectively, create airflow in the plants will clean and cooler.

The principle of operation of the machine with water cooling buildings:

Coolers Cooling Pad with 4 plates are arranged in standing around the machine, the water will flow into the array level on the surface of the plate Pad; Rotating propellers sucking surrounding air environment through the plate Pad blown into space cooling is required, air and water through evaporation screen then the air temperature is reduced from 5 ~ 7oC depending on conditions accessories and design, in the special case can be reduced to 10 ° C and cool air is blown into the position required cooling air through the duct system and air vents.

Reality has demonstrated in the space, the air-cooling system factory economic efficiency than air conditioning systems for factories.

Scope of application Coolers Factory:

* Cooling Workshop: Garment, Textile Dyeing-Footwear, Chemicals, Plastics, Machines mechanics, Glass, industrial printing, processing factory - packaged food, ..

* Utilities: Cooling basement buildings, hospitals, bus stations, stadiums, exhibition halls, kitchens, restaurants, entertainment centers, underground supermarket, warehouse, laundry room. places no stringent requirements on moisture ..

* Arable farming sector: Cooling air for growers produce high-tech, cage birds, livestock, industrial-scale fisheries.

• ABOUT AIR COOLING - DESCRIPTION Coolers(05.06.2015)